Dinstar MTG600 Manual de usuario descargar pdf (Pagina 21)

MTG600 User Manual

17 / 57

2.5.2 PRI Trunk

Figure 2-5-3 PRI Trunk

Users can add/delete/modify PRI trunk in this configuration option.

Figure 2-5-4 Add PRI Trunk

PRI trunk description

Trunk No

The number of PRI trunk; when user add PRI trunk, 0~7 number will appear in the

pull-down menu to be selected (the number here depends on E1/T1 physical port

number actually existed in equipment). After trunk number is established, filling in

corresponding port number in “E1/T1 Port No.”, so as to assign E1/T1 to designated

trunk; Each PRI trunk corresponds to a E1/T1 port.

Trunk Name

Description of PRI trunk

Channel ID

Channel ID of E1/T1 ports, this number definition generally starts from 0.

D-channel

Indicate whether E1/T1 supports D channel, the default is Yes.

E1/T1 Port No

E1/T1 port number is numbered according to the physical position of E1/T1, it generally

starts from 0.

Protocol

Interface type of PRI. There are two types are available: ISDN and QSIG; the default is

ISDN.

Switch Side

Indicate PRI network property of E1/T1, it is divided into: “User side” and“Network side”.

When PRI loopback is carried out, the network properties of E1/T1 port at both receiving

and sending sides must be different.

Alerting Indication

The ring signal include Alerting and Progress

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 56 57

Sin comentarios

Dinstar MTG600 Manual de usuario Pagina 21